The gas steam generator will shut down for a while

Combined Heat and Power Technology Fact Sheets Series: Steam …

a boiler or heat recovery steam generator (HRSG). Unlike gas turbines or microturbines, steam turbines do not directly consume fuel. Rather, the fuel driving the process is the fired boiler or plant equipment that produces heat for the HRSG (e.g., a gas turbine).

learn More

Starting and Stopping Boiler - Marine Engineering

If an emergency shut down must be carried out, the fuel supply should be stopped. The main steam valve should be closed gradually, and the boiler must be cooled. The safety valves must not be operated. Parallel working boilers should be disconnected at once.

learn More

50 Questions and Answers For Marine Engineers

B. close the air cock once fires are lit C. blow down the gage glass D. crack the steam stop to assure protective steam flow Answer-A 11. Steam temperature control for the ESD-II boiler is achieved by: A. Fitting a de-superheater between 1st & 2nd passes of

learn More

Steam Pressure Reduction: Opportunities and Issues

BestPractices Technical Brief Steam Pressure Reduction: Opportunities and Issues varies directly in proportion to the boiler's net stack temperature (the difference between the flue gas tem-perature and combustion air temperature). When boiler pressure is

learn More

50 Questions and Answers For Marine Engineers

B. close the air cock once fires are lit C. blow down the gage glass D. crack the steam stop to assure protective steam flow Answer-A 11. Steam temperature control for the ESD-II boiler is achieved by: A. Fitting a de-superheater between 1st & 2nd passes of

learn More

An introduction to steam generation and distribution

10 Endress+Hauser – Steam Handbook 1960s. This development, in the United Kingdom, was driven by the Clean Air Act of 1956 which effectively proscribed the use of coal in cities. The packaged boiler provided the user with a number of benefits,i.e. boilers that …

learn More

Steam Turbines and Boilers - UNIRI

steam stop, guardian and bulkhead stop valves are to be shut prior to maintenance work being carried out. In the case where a simulated test would be unsatisfactory and operation with live steam has to be carried out, then the vessel is to be suitably anchored

learn More